China DP1300-M Series Gauge or Absolute Pressure Transmitters – Maxonic factory and manufacturers

DP1300-M Series Gauge or Absolute Pressure Transmitters – Maxonic

Send email to us

Product Detail

Product Tags

Feedback (2)

Our well-equipped facilities and excellent excellent management throughout all stages of creation enables us to guarantee total buyer satisfaction for Silicon Oil Filled Pressure Transmitter, 2 Wire Pressure Sensor, Pressure Sensor Mount, The team of our company with the use of cutting-edge technologies delivers impeccable quality products supremely adored and appreciated by our customers worldwide.

DP1300-M Series Gauge or Absolute Pressure Transmitters – Maxonic Detail:

DP1300-M gauge pressure/absolute pressure transmitter has a wide range of applications, including petroleum, chemical, gas, electricity, military, water conservancy, food and etc.

1. Independent innovation and anti-overload structure make the transmitter more secure.
2. Unique dual sensor technology, accurate and stable measurement.
3. This kind of monosilicon type smart transmitter has excellent insulation performance between the core components and the shell, which ensures that the sensor output signal will not be disturbed on site.

Standard Specification

Span adjustment based on standard zero point, with stainless steel 316 L diaphragm, filling liquid is silicone oil.

Performance Specification

Reference Accuracy of Adjustment Span

(Includes linearity from zero, hysteresis and repeatability): ± 0.075%

TD> 10 ( TD=Maximum span/adjustment span): ±(0.0075×TD)%

Square root output accuracy is 1.5 times the linear reference accuracy above

Ambient Temperature Effect

Span Code

- 20℃～65℃ Total impact

B/L

±( 0.30×TD+ 0.20 )% ×Span

Other

±( 0.20×TD+ 0.10 )% ×Span

Span Code

- 40℃～- 20℃ and 65℃～85℃ Total impact

B/L

±( 0.30×TD+ 0.20 )% ×Span

Other

±( 0.20×TD+ 0.10 )% ×Span

Over-span Effect

±0 . 075% ×Span

Span Code

Amount of Influence

Long Term Stability

B/L

±0.2% ×Span/ 1Year

Other

±0.1% ×Span/ 1Year

Power Impact

±0.001% / 10 V(12～42 V DC)

Measuring Range(Gauge pressure transmitter)

kpa/ mbar

0.6～6 /- 6～6

6 ～ 60 /- 60 ～ 60

2 ～ 40 /- 40 ～ 40

0.02 ～ 0.4 /- 0.4 ～ 0.4

2.5 ～ 250 /- 100 ～ 250

0.025 ～ 2.5 /- 1 ～ 2.5

30 ～ 3000 /- 100 ～ 3000

0.3 ～ 30 /- 1 ～ 30

100 ～ 10000 /- 1000 ～ 100000

1 ～ 100 /- 1 ～ 100

210 ～ 21000/-1000 ～ 210000

2.1 ～ 210 /- 1 ～ 210

400 ～ 40000 /-1000 ～ 400000

4 ～ 400 /- 1 ～ 400

600 ～ 60000 /-1000 ～ 600000

6 ～ 600 /- 1 ～ 60

Measuring Range(Absolute pressure transmitter)

kpa/ mbar

2 ～ 40 /- 40 ～ 40

0.02 ～ 0.4 /- 0.4 ～ 0.4

2 . 5 ～ 250 /- 100 ～ 250

0.025 ～ 2.5 /- 1 ～ 2.5

30 ～ 3000 /- 100 ～ 3000

0.3 ～ 30 /- 1 ～ 30

Span Limit

Within the upper and lower limits of the span, it can be adjusted arbitrarily;
It is recommended to select a span code with the lowest possible turndown ratio to optimize performance characteristics.

Zero Point Setting

Zero point and span can be adjusted to any value within the measurement span in the table (as long as: calibration span ≥ minimum span).

Installation Location Influence

The change of the installation position parallel to the diaphragm surface will not cause zero drift effect. If the change of the installation position and the diaphragm surface exceeds 90°, the zero position effect in the span of < 0.06 Psi will occur, which can be corrected by adjusting the zero adjustment, with no range effect.

Output

Two-wire, 4～20 m ADC， HART output digital communication can be selected, linear or square root output can also be selected.
Output signal limit：Imin= 3.9 m A, Imax= 20.5 m A

Alarm Current

Low report mode(Mini): 3.7 m A
High report mode (Max): 21 m A
Non-reporting mode (hold): keep the effective current value before the fault and report
Standard setting of alarm current: high mode

Response Time

The damping constant of the amplifier part is 0.1 s and the sensor time constant is 0.1 to 1.6 s, depending on the range and range ratio.The additional adjustable time constant is 0.1 to 60 s.

Preheat Time

< 15 s

Ambient Temperature

- 40～85℃
With LCD display and fluororubber sealing ring: – 20～65℃

Storage Temperature

- 50～85℃
With LCD display: – 40～85℃

Pressure Limit

From vacuum to maximum range

Material

Diaphragm: Stainless Steel 316 L, C-276 alloy
Process Connection: Stainless Steel 316L
Transmitter Cover: Aluminum alloy material, epoxy resin sprayed on the surface
Filling Fluid: Silicone Oil

Protection Class

IP67

Product detail pictures:

Related Product Guide:

With dependable high quality approach, great reputation and excellent customer support, the series of products and solutions produced by our firm are exported to lots of countries and regions for DP1300-M Series Gauge or Absolute Pressure Transmitters – Maxonic , The product will supply to all over the world, such as: Oslo, Karachi, Mombasa, Adhering to the principle of "Enterprising and Truth-Seeking, Preciseness and Unity", with technology as the core, our company continues to innovate, dedicated to providing you with the highest cost-effective products and meticulous after-sales service. We firmly believe that: we are outstanding as we are specialized.

Monocrystalline Silicon Pressure Sensor