China OEM/ODM Manufacturer Monocrystalline Silicon Pressure Transmitter - DP1300-M Series Gauge or Absolute Pressure Transmitters – Maxonic factory and manufacturers

OEM/ODM Manufacturer Monocrystalline Silicon Pressure Transmitter - DP1300-M Series Gauge or Absolute Pressure Transmitters – Maxonic

Send email to us

Product Detail

Product Tags

Feedback (2)

Our mission is usually to turn into an innovative provider of high-tech digital and communication devices by providing worth added design and style, world-class producing, and repair capabilities for Static Pressure Transducer, Piezoresistive Pressure Transducer, 0-1500 Psi Pressure Transducer, We sincerely hope to serve you and your business with a good start. If there is anything we can do for You, we shall be more than pleased to do so. Welcome to our factory for visit.

OEM/ODM Manufacturer Monocrystalline Silicon Pressure Transmitter - DP1300-M Series Gauge or Absolute Pressure Transmitters – Maxonic Detail:

DP1300-M gauge pressure/absolute pressure transmitter has a wide range of applications, including petroleum, chemical, gas, electricity, military, water conservancy, food and etc.

1. Independent innovation and anti-overload structure make the transmitter more secure.
2. Unique dual sensor technology, accurate and stable measurement.
3. This kind of monosilicon type smart transmitter has excellent insulation performance between the core components and the shell, which ensures that the sensor output signal will not be disturbed on site.

Standard Specification

Span adjustment based on standard zero point, with stainless steel 316 L diaphragm, filling liquid is silicone oil.

Performance Specification

Reference Accuracy of Adjustment Span

(Includes linearity from zero, hysteresis and repeatability): ± 0.075%

TD> 10 ( TD=Maximum span/adjustment span): ±(0.0075×TD)%

Square root output accuracy is 1.5 times the linear reference accuracy above

Ambient Temperature Effect

Span Code

- 20℃～65℃ Total impact

B/L

±( 0.30×TD+ 0.20 )% ×Span

Other

±( 0.20×TD+ 0.10 )% ×Span

Span Code

- 40℃～- 20℃ and 65℃～85℃ Total impact

B/L

±( 0.30×TD+ 0.20 )% ×Span

Other

±( 0.20×TD+ 0.10 )% ×Span

Over-span Effect

±0 . 075% ×Span

Span Code

Amount of Influence

Long Term Stability

B/L

±0.2% ×Span/ 1Year

Other

±0.1% ×Span/ 1Year

Power Impact

±0.001% / 10 V(12～42 V DC)

Measuring Range(Gauge pressure transmitter)

kpa/ mbar

0.6～6 /- 6～6

6 ～ 60 /- 60 ～ 60

2 ～ 40 /- 40 ～ 40

0.02 ～ 0.4 /- 0.4 ～ 0.4

2.5 ～ 250 /- 100 ～ 250

0.025 ～ 2.5 /- 1 ～ 2.5

30 ～ 3000 /- 100 ～ 3000

0.3 ～ 30 /- 1 ～ 30

100 ～ 10000 /- 1000 ～ 100000

1 ～ 100 /- 1 ～ 100

210 ～ 21000/-1000 ～ 210000

2.1 ～ 210 /- 1 ～ 210

400 ～ 40000 /-1000 ～ 400000

4 ～ 400 /- 1 ～ 400

600 ～ 60000 /-1000 ～ 600000

6 ～ 600 /- 1 ～ 60

Measuring Range(Absolute pressure transmitter)

kpa/ mbar

2 ～ 40 /- 40 ～ 40

0.02 ～ 0.4 /- 0.4 ～ 0.4

2 . 5 ～ 250 /- 100 ～ 250

0.025 ～ 2.5 /- 1 ～ 2.5

30 ～ 3000 /- 100 ～ 3000

0.3 ～ 30 /- 1 ～ 30

Span Limit

Within the upper and lower limits of the span, it can be adjusted arbitrarily;
It is recommended to select a span code with the lowest possible turndown ratio to optimize performance characteristics.

Zero Point Setting

Zero point and span can be adjusted to any value within the measurement span in the table (as long as: calibration span ≥ minimum span).

Installation Location Influence

The change of the installation position parallel to the diaphragm surface will not cause zero drift effect. If the change of the installation position and the diaphragm surface exceeds 90°, the zero position effect in the span of < 0.06 Psi will occur, which can be corrected by adjusting the zero adjustment, with no range effect.

Output

Two-wire, 4～20 m ADC， HART output digital communication can be selected, linear or square root output can also be selected.
Output signal limit：Imin= 3.9 m A, Imax= 20.5 m A

Alarm Current

Low report mode(Mini): 3.7 m A
High report mode (Max): 21 m A
Non-reporting mode (hold): keep the effective current value before the fault and report
Standard setting of alarm current: high mode

Response Time

The damping constant of the amplifier part is 0.1 s and the sensor time constant is 0.1 to 1.6 s, depending on the range and range ratio.The additional adjustable time constant is 0.1 to 60 s.

Preheat Time

< 15 s

Ambient Temperature

- 40～85℃
With LCD display and fluororubber sealing ring: – 20～65℃

Storage Temperature

- 50～85℃
With LCD display: – 40～85℃

Pressure Limit

From vacuum to maximum range

Material

Diaphragm: Stainless Steel 316 L, C-276 alloy
Process Connection: Stainless Steel 316L
Transmitter Cover: Aluminum alloy material, epoxy resin sprayed on the surface
Filling Fluid: Silicone Oil

Protection Class

IP67

Product detail pictures:

Related Product Guide:

We have been experienced manufacturer. Wining the majority of your crucial certifications of its market for OEM/ODM Manufacturer Monocrystalline Silicon Pressure Transmitter - DP1300-M Series Gauge or Absolute Pressure Transmitters – Maxonic , The product will supply to all over the world, such as: Lahore, Riyadh, Jakarta, Aiming to grow to be by far the most professional supplier within this sector in Uganda, we keep researching on the creating procedure and raising the high quality of our principal goods. Till now, the merchandise list has been updated on a regular basis and attracted customers from around the globe. Detailed data can be obtained in our web page and you'll be served with good quality consultant service by our after-sale team. They're going to allow you to get complete acknowledge about our items and make a satisfied negotiation. Small business check out to our factory in Uganda can also be welcome at any time. Hope to obtain your inquiries to get a happy co-operation.

Monocrystalline Silicon Pressure Sensor

Monocrystalline Silicon Pressure Transmitter

The company keeps to the operation concept "scientific management, high quality and efficiency primacy, customer supreme", we have always maintained business cooperation. Work with you,we feel easy!