-
China Supplier China Explosion-Proof Flanged Guided Radar Level Transmitter
ST series Ex transmitter is specially designed to prevent explosion when measuring temperature.It uses the principle of gap explosion-proof to design components such as junction boxes with sufficient strength, and seal all parts that generate sparks, arcs and dangerous temperatures in the junction box. When an explosion occurs in the box, it can be extinguished and cooled through the gap of the joint surface, so that the flame and temperature after the explosion cannot be transmitted to the outside of the box, so as to achieve explosion-proof.
-
8 Years Exporter China Rika Rk200-03 Wmo Class 2 0-2000W/M2 Pyranometer Solar Radiation Sensor Transducer for PV Power Station
ST series transmitter is specially designed for temperature measurement.The transmitter converts the measured temperature into an electrical signal. The electrical signal enters the A/D converter through the isolated module of the transmitter. After multi-level compensation and calibration of the data by the microprocessor, the corresponding analog or digital signal is output and displayed on the LCD module. The FSK modulation signal of the HART protocol is superimposed on the 4-20mA current loop through the modulation and demodulation module.
-
Factory wholesale China Mjzp-N Pipe Temperature Sensor for Water Heater Refrigerator Air Conditioner Water Dispenser Kettle 120° C Waterproof
ST series sheathed thermocouple is especially suitable for installation in temperature measurement occasions where the pipeline is narrow, curved and requires rapid response and miniaturization.It has the advantages of slender body, fast thermal response, vibration resistance, long service life and easy bending. Sheathed thermocouple is usually used in conjunction with display instruments, recording instruments, electronic computers and etc. It can directly measure liquid, steam, gas medium and solid surface with temperature in the range of -200℃～1500℃ in various production processes.It is widely used in petrochemical, electric power, metallurgy and other industries.
-
2019 China New Design China Water/Oil/Liquid/Gas Pressure Transmitter Sensor 0-100MPa/0-1000bar Psi
NT series pressure sensor core adopts leading technology which uses two pieces of MEMS silicon wafers for challenging measuring requirements and general industrial applications in the mid and high pressure ranges. Its manufacturing process is to bond the PCB board on the diaphragm surface of the sensor after the integrated pressure diaphragm is packaged. Subsequently, the bonding process is used to connect the two pieces of MEMS silicon wafers to the PCB board, so that it can output the signal.
-
Price Sheet for China ISO 9001 4~20mA/0~20mA/0~10mA/1~5V Pressure Transducer with LED Display
DP1300-DP Series differential pressure transmitter is used to measure the liquid level, density, pressure, and flow of liquid, gas or steam, and then convert it into a 4-20mADC HART current signal output.DP1300-DP Series differential pressure transmitter can also communicate with HART375 hand-held Parameter setting, process monitoring, etc. This sensor module adopts all welding technology and has an integrated overload diaphragm, an absolute pressure sensor, a temperature sensor and a differential pressure sensor inside. The protection level of this product can reach IP67.
-
Price Sheet for China ISO 9001 4~20mA/0~20mA/0~10mA/1~5V Pressure Transducer with LED Display
DP1300-DP Series differential pressure transmitter is used to measure the liquid level, density, pressure, and flow of liquid, gas or steam, and then convert it into a 4-20mADC HART current signal output.DP1300-DP Series differential pressure transmitter can also communicate with HART375 hand-held Parameter setting, process monitoring, etc. This sensor module adopts all welding technology and has an integrated overload diaphragm, an absolute pressure sensor, a temperature sensor and a differential pressure sensor inside. The protection level of this product can reach IP67.
